Advanced Tek logo
close
Linkedin logo

Replicator Mini+

Benchmark Sample Request Download Spec Sheet
View Image Gallery

MakerBot

Key Features & Benefits

  1. Print bigger models up to 4” by 5” by 5”—28% larger than the MakerBot Replicator Mini
  2. 10% faster(1) print time than the MakerBot Replicator Mini Compact 3D Printer
  3. The redesigned Z-stage(2) and refined gantry(3) improve precision and reliability through stiffer materials and sturdier construction
  4. To ensure consistent performance, our new 3D printers and their subsystems were re-engineered and rigorously tested for over 380,000 hours across multiple facilities(4)
  5. With the new Grip Surface, prints adhere better, resulting in reduced warping and curling. No more blue tape. The built plate is also factory-leveled so the printer is ready to go right out of the box

 

(1) This number is derived from our testing and depends on the geometry of the model.

(2) The z-stage has been fully re-engineered, featuring a more rigid backbone. The build plate is ultra-flat and the z-stage is calibrated before each print to ensure consistency and better print quality.

(3) Gantry friction was reduced 50% by redesigning the bearing actuator. It now features higher-quality bearings and shafts to ensure better alignment than the previous printer.

(4) This testing includes the Replicator+, Replicator Mini+, and subsystems within the printers.

System Features

PRINT TECHNOLOGY:

FUSED DEPOSITION MODELING

 

BUILD VOLUME:

4 L X 5 W X 5 H IN

 

LAYER RESOLUTION:

MINIMUM 0.0039 IN (100 MICRONS)

MAXIMUM 0.0156 IN (400 MICRONS)

 

FILAMENT DIAMETER:

0.069 IN (1.75 MM)

 

FILAMENT COMPATIBILITY:

SMALL SPOOL OF MAKERBOT PLA FILAMENT [0.2 KG] 0.5 LB

 

NOZZLE DIAMETER:

0.015 IN (0.4MM)

 

PRINT FILE TYPE:

.MAKERBOT

 

AMBIENT OPERATING TEMPERATURE:

60-78 F (15-26 C)

 

STORAGE TEMPERATURE:

32-100 F (0-38 C)

 

PRODUCT DIMENSIONS:

11.6 L X 13.8 W X 15.0 H IN

 

SHIPPING BOX:

15.3 L X 17.9 W X 20.6 H IN

 

PRODUCT WEIGHT:

20.5 LBS.

SHIPPING WEIGHT:

26.8 LBS. (INCLUDES ACCESSORY KIT)

 

BUILD SURFACE:

GRIP SURFACE

 

SOFTWARE BUNDLE:

MAKERBOT PRINT, MAKERBOT MOBILE

 

SUPPORTED FILE TYPES:

Mac: MakerBot (.makerbot), STL (.stl) Windows: MakerBot (.makerbot), STL (.stl), SolidWorks (.sldprt, .sldasm), InventorOBJ (.ipt, .iam), IGES (.iges, .igs), STEP AP203/214 (.step, .stp), CATIA (.CATPart, .CATProduct), Wavefront Object (.obj), Unigraphics/NX (.prt), Solid Edge (.par, .asm), ProE/Creo (.prt, .prt., .asm, .asm.), VRML(.wrl), Parasolid (.x_t, .x_b)

 

OPERATING SYSTEMS:

WINDOWS (7, 10), MAC OS X (10.9+), No Linux Support

 

POWER REQUIREMENTS:

100-240 V AC; 0.75-0.41 A; 50-60 HZ; 100 W

 

CONNECTIVITY:

USB OR WI-FI