Advanced Tek logo
close
Linkedin logo

Stratasys F370

Request Demo Benchmark Sample Request Download Spec Sheet
View Image Gallery

Stratasys Design Series

Precision

Performance

Material Options

  • PLA for quick concept and verification models with good tensile strength
  • ABS-M30 in six colors for great tensile, impact and flexural strength
  • ASA for UV stability and the best aesthetics
  • PC-ABS for the highest impact strength, plus the mechanical properties and heat resistance of PC and the surface appeal of ABS

System Features

Build size:
355 x 254 x 355 mm (14 x 10 x 14 in)

 

Layer thicknesses:
0.330 mm (0.013 in), 0.254 mm (0.010 in), 0.178 mm (0.007 in), 0.127 mm (0.005 in)

 

Material delivery:
4 material spool bays, 2 for model, 2 for support located in a drawer on the front of the unit

 

System Requirements:
Windows 7, 8, 8.1, and 10 (64bit only) with a minimum of 4GB RAM (8GB or more recommended)

 

Support Structure:
QSR support material

 

Recommended Cleaning Station:
SCA-1200HT or SCA-3600

Network connectivity:
Wired: TCP/IP protocols at 100MBPS minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless: IEEE 802.11n, g, or b; Authentication: WPA2-PSK, 802.1x EAP; Encryption: CCMP, TKIP

 

Size and weight:
163 x 86 x 71 cm (64 x 34 x 28 in.)/with crate: 227 kg (500 lbs.), with consumables

 

Power requirements:
100–132V/15A or 200–240V/7A. 50/60 Hz

 

Regulatory compliance:
CE, FCC, EAC, EMC (low-voltage directive), CE, TUV, FCC, RC, RCM, EAC, RoHs, WEEE, Reach

 

Special facility requirements:
None