Build size/printing area:
Round Print Tray with up to 1,174cm2 (182 in2)
Print Height: 158mm (6.22 in.)
Maximum model height: 155 mm (6.1 in.)
[The printable height is 158 mm (6.22 in.) and the max printable model height is 155 mm (6.1 in.)]
HQS print mode at 18.75 microns (0.0007 in.)
Deviation from STL dimensions, for 1 Sigma (67%) of models printed with rigid materials, based on size: under 100 mm – ±150μ; above 100 mm – ±0.15% of part length.**
Deviation from STL dimensions, for 2 Sigma (95%) of models printed with rigid materials, based on size: under 100 mm – ±180μ; above100 mm – ±0.2% of part length.**
SUP710 (breakaway and water dissolving or waterjet)
**Measured when ambient temperature is 23 °C and relative humidity is 50%.
Size and weight:
651 x 661 x 774 mm (25.63 x 26.02 x 30.48 in.); 98 Kg (216 lbs.)
LAN – TCP/IP
100-240VAC, 50-60 HZ, 10A, 1 phase
CE, FCC, EAC, cTUVus, CB
Limited attendance for job start and stop required.