Advanced Tek logo
close
Linkedin logo

J5 MediJet

//The all-in-one medical printer.

Request Demo Request Sample Part Download Brochure Request Quote
Stratasys J5 MediJet 3D Printer View Image Gallery

Material Options

  • Biocompatible Rigid Transparent (MED610) – transparent, sterilizable, biocompatible material medically approved for bodily contact
  • Biocompatible Opaque (MED615RGD IV) – Rigid Ivory, sterilizable, biocompatible material medically approved for bodily contact
  • Rigid Transparent Colors (VeroCyanV, VeroMagentaV, VeroYellowV, VeroBlackPlus, VeroUltra ClearS) – Provides unique multicolor capabilities to produce sterilizable, smooth, accurate and realistic models
  • DraftWhite (MED837) – Opaque, UV resistant, low-cost model material, which aims to lower the cost of single material applications and bulk color models
  • Elastico Clear (FLX934) – Transparent flexible material with Shore A value of 45, with a superior tear-resistant and elongation

Order Materials

System Features

Supported sterilization processes:
Steam (4 minutes at 132 °C), Gamma (25 – 50 kGy),
EtO (specifications available upon request)

 

Digital model materials:
Unlimited number of composite materials including over 500,000 colors

 

Support materials:
SUP710™ (Water Jet removable)

 

Build Tray:
Printing area: 1,174cm2
Max Part Size: Up to 140 x 200 x 190mm (5.51 x 7.87 x 7.48 in.)

 

Layer thickness:
Horizontal build layers down to 18 microns (0.0007 in.)

 

Accuracy:
Deviation from STL dimensions with rigid materials,based on size:
under 100 mm – ±150μ; above 100 mm – ±0.15% of part length.*
* true for 67% (1 sigma) models printed for future information can be found in the spec sheet

 

System size and weight:
651 x 661 x 1551mm (25.63 x 26.02 x 61.06 in.); 228 kg (503 lbs.)

 

Network connectivity:
LAN – TCP/IP

 

Power requirements:
100 – 240 VAC, 50 – 60 HZ, 10A, 1 phase

 

Regulatory Compliance:
CE, FCC, EAC

 

Operating conditions:
Temperature 18 – 25 °C (64 – 77 °F); relative humidity 30-70% (non-condensing)

 

Software:
GrabCAD Print

 

Build modes:
Temperature 18 – 25 °C (64 – 77 °F); relative humidity 30-70% (non-condensing)

 

Recommended support cleaning systems:
CSIIP and Balco WaterJet
DEMI 200 or DEMI 400