Advanced Tek logo
Linkedin logo

Stratasys F170

Request Demo Benchmark Sample Request Download Spec Sheet
View Image Gallery

Stratasys Design Series



Material Options

  • PLA for quick concept and verification models with good tensile strength
  • ABS-M30 in six colors for great tensile, impact and flexural strength
  • ASA for UV stability and the best aesthetics

System Features

Build size:
254 x 254 x 254 mm (10 x 10 x 10 in)


Layer thicknesses:
0.330 mm (0.013 in), 0.254 mm (0.010 in), 0.178 mm (0.007 in), 0.127 mm (0.005 in)


Material delivery:
2 material spool bays, 1 for model, 1 for support located in a drawer on the front of the unit


System Requirements:
Windows 7, 8, 8.1, and 10 (64bit only) with a minimum of 4GB RAM (8GB or more recommended)


Support Structure:
QSR support material


Recommended Cleaning Station:

Network connectivity:
Wired: TCP/IP protocols at 100MBPS minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless: IEEE 802.11n, g, or b; Authentication: WPA2-PSK, 802.1x EAP; Encryption: CCMP, TKIP


Size and weight:
163 x 86 x 71 cm (64 x 34 x 28 in.)/with crate: 227 kg (500 lbs.), with consumables


Power requirements:
100–132V/15A or 200–240V/7A. 50/60 Hz


Regulatory compliance:
CE, FCC, EAC, EMC (low-voltage directive), CE, TUV, FCC, RC, RCM, EAC, RoHs, WEEE, Reach


Special facility requirements: