Advanced Tek logo
Linkedin logo

Stratasys J735/J750

//If seeing is believing, holding something this real is knowing for sure.

Request Demo Benchmark Sample Request Download Spec Sheet
View Image Gallery

Material Options

  • Rigid Opaque (VeroBlackPlus, VeroBlue, VeroCyan, VeroGray, VeroMagenta, Vero PureWhite, VeroYellow, VeroMagentaV, VeroYellowV)
  • Transparent (VeroClear, RGD720)
  • Digital ABS Plus (fabricated inside the 3D printer from RGD515 Plus and RGD535 or RGD531)
  • Rubber-like (Tango Gray, Tango Black, Agilus30 Black, Agilus30 Translucent, Agilus30 White)
  • Digital Materials Combine two to six PolyJet photopolymers in specific concentrations and microstructures to create a composite material with hybrid characteristics
  • VeroFlex and VeroFlexVivid (Cyan, Magenta, Yellow, White, Black, Clear, Vivid Magenta, Vivid Yellow, Vivid Cyan)

System Features

Net build size:
J735: 350 x 350 x 200 mm (13.8 x 13.8 x 7.9 in.)
J750: 490 x 390 x 200 mm (19.3 x 15.35 x 7.9 in.)


Layer thickness:
Horizontal build layers down to 14 microns (0.00055 in.)


Build modes:
High Speed: up to 3 base resins, 27-micron (0.001 in.) resolution
High Quality: up to 6 base resins, 14-micron (0.00055 in.) resolution
High Mix: up to 6 base resins, 27-micron (0.001 in.) resolution


20-85 micron for features below 50 mm; up to 200 micron for full model size (for rigid materials only, depending on geometry, build parameters and model orientation)


Support materials:
SUP705 (water jet removable)
SUP 706B (soluble)

Size and weight:
Machine: 55.1 x 49.6 x 43.4 in.; 948 lbs
Material Cabinet: 26.4 x 46.1 x 25.2 in.; 335 lbs


Workstation compatibility:
Windows 7 and 8.1 64 bit


Network connectivity:


Power requirements:
110–120 VAC, 50/-0 Hz, 13.5 A, 1 phase
220-240 VAC, 50-60 Hz, 7 A, 1 phase


Regulatory Compliance:


Operational environment:
Temperature 18 C-25 C (64 F-77 F); Relative Humidity 30-70% (non-condensing)


Recommended Support Cleaning Systems:
CSIIP and Balco WaterJet