LOCTITE® 3D IND402 High Rebound by Henkel in a single component elastomer with high resilience and rebound. Capable of maintaining excellent tensile strength and does not require thermal post-processing. It is comparable to commercial TPUs, with a Shore A hardness of 75. Ideal for lattice structures; e.g., mid-soles and soft inserts.
Key features:
• True elastomeric behavior
• Excellent interlayer adhesion
• Good rebound performance
• Exceptional durability to compression forces
• 230% elongation at break
• 28 N/mm tear strength
• Shore 75A
• Color: Black
//Low viscosity urethane elastomer with cushioning properties to absorb mechanical shock and vibrations.
Ultracur3D® EL150 by BASF is a High resolution, fast-printing elastomer with good tear strength. Low durometer, good resilience, and excellent surface quality. Ideal for gaskets, sports cushioning, foam replacement, handles and grips.
Key features:
• Shore 78A
• 150% elongation at break
• Easy to handle, low viscosity and fast cure times
• Print fine features not possible on other elastomers
• 15 N/mm tear strength
• Color: Natural
LOCTITE® 3D IND402 High Rebound by Henkel in a single component elastomer with high resilience and rebound. Capable of maintaining excellent tensile strength and does not require thermal post-processing. It is comparable to commercial TPUs, with a Shore A hardness of 75. Ideal for lattice structures; e.g., mid-soles and soft inserts.
