Advanced Tek logo
Linkedin logo

Engineering Plastics Simulation

Below is a list of Engineering Plastics Simulation
VeroFlex and VeroFlexVivid

//Designed to meet the unique prototyping needs of eyewear manufacturers

VeroFlex™ and VeroFlexVivid™ are PolyJet rigid photopolymer materials offering a flexibility ideal for rapid prototyping eyewear. Get prototypes with full-part realism in a wide range of colors, textures and materials from opaque to transparent, unique to the Stratasys J735/J750.

VeroFlex accurately simulates the look, feel and function of eyewear, enabling improved performance testing. Eyewear prototypes produced with Veroflex can better withstand drop tests, lens-mounting and wearability tests.

Shorten product development cycles down to one to two months with a more efficient design workflow. Respond to market trends faster and improve eyewear sales with VeroFlex on your Stratasys J735/J750.

For brighter colors, try the VeroFlexVivid Colors – VeroFlexVivid-Magenta, VeroFlexVivid-Yellow, and VeroFlexVivid-Cyan.

VeroFlex and VeroFlexVivid System Compatibility

  • Stratasys J735/J750

Order Materials

Download Spec Sheet
Digital ABS Plus

//Digital ABS reformulated for greater impact resistance

Digital ABS Plus (fabricated inside the 3D printer from RGD515 Plus and RGD531) provides better impact strength in addition to its previously well-known attributes of high-temperature resistance, toughness and superior finish. Digital ABS2 Plus delivers those properties plus superior rigidity and toughness in walls thinner than 1.3 mm (.051 in.). Both materials are suitable for parts that require PolyJet technology’s highest possible impact resistance and shock absorption.

Digital ABS White

Digital ABS Plus System Compatibility

Order Materials

Download Spec Sheet
High Temperature

//3D print models with thermal resistance and dimensional stability

High Temperature material (RGD525, white) combines heat resistance with exceptional dimensional stability. The material can simulate the thermal performance of engineering plastics and is ideal for testing applications such as hot-air flow or hot-water flow in pipes and faucets.

Objet High Temperature material has a heat deflection temperature of 63–67 C (145-153 F) upon removal from the printer. Thermal post treatment in a programmable oven can increase this to 75-80 C (167-176 F).

High Temperature System Compatibility

  • Objet30 Pro (V3 and older)
  • Objet30 Prime (V3 and older)
  • Objet30 V5 (Pro and Prime)
  • Objet Eden260VS
  • Objet260 Connex1/2
  • Objet260 Connex3
  • Objet350 Connex1/2
  • Objet350/500 Connex3
  • Objet500 Connex1/2

Order Materials

Download Spec Sheet