Advanced Tek logo
close
Linkedin logo

PostProcess Surface Finish Solutions

Below is a list of PostProcess Surface Finish Solutions

Design Series

LEVO

When time is crucial, the LEVO offers the fastest cycle times in PostProcess’ Surface Finish Design Series. Their patent-pending circular units are also ideal for running smaller parts to achieve an automated ‘customer-ready’ finish.

The LEVO Surface Finish is capable of finishing surfaces of the following 3D printing technologies: FDM, SLS, SLA, CLIP, PolyJet, Multi Jet Fusion (MJF) and more.

The LEVO Surface Finish system applies patent-pending technology, including optimized energy with circular motion, combined with abrasive and polishing media, to achieve your desired surface finish results. The LEVO has been designed to meet the specifications for the desired Roughness Average (Ra) to achieve various types of finishes on a wide range of 3D printed materials.

The LEVO, along with PostProcess’ entire surface finishing line, has been designed with noise-reducing features for low dBa to reduce the noise in your production environment.

Click to download the LEVO sell sheet.

RADOR

Whatever your surface finish requirements are, the RADOR has been engineered to meet the specifications for the desired Roughness Average (Ra) to achieve various types of finishes on a wide range of 3D printed materials. The RADOR is capable of finishing surfaces of the following 3D printing technologies: FDM, SLS, SLA, CLIP, PolyJet, Multi Jet Fusion (MJF) and more.

The RADOR Surface Finish system applies patent-pending technology, including optimized energy with vertical motion combined with proprietary eco-friendly consumables to achieve the required surface finish on each of your 3D parts. The RADOR is ideal for larger parts, or with an optional divider, can run two smaller envelope sizes with different media in each allowing for the handling of abrasion and polishing.

The RADOR, along with PostProcess’ entire surface finishing line, has been designed with noise-reducing features for low dBa to reduce the noise in your production environment.

Click to download the RADOR sell sheet..

 

Production Series

DECI Duo

Hybrid DECI Duo With the patent-pending Hybrid DECI Duo, support removal and surface finishing of 3D printed parts is automated in a single, multi-functioning system and designed with a space-saving footprint that optimizes production floor space.

The Hybrid DECI Duo has been engineered for the most advanced 3D print materials such as resins, thermoplastics, and metals, and offer fast cycle times for even the most complex parts, including those with internal channels, organic geometries, and honeycombs. The DECI Duo is capable of removing supports and finishing surfaces of the following 3D printing technologies: FDM, SLS, SLA, Multi Jet Fusion (MJF), DMLS/Binder Jetting, and more.

Through a combination of optimized energy, exclusive chemistry including detergents and suspended solids, the system is guided by PostProcess’ proprietary AUTOMAT3D™ software to remove support material and provide the desired surface finish while preserving fine-detail part geometries. The Hybrid DECI Duo thinks like a member of your team, monitoring and reacting in real-time to maintain optimal conditions with sophisticated features like pre-programmed preventative maintenance schedules, intelligent cycle time programming, and one-touch repeatability with recipes stored within the software.

Thoughtfully designed, the Hybrid DECI Duo also includes an LED lighted chamber, noise reducing features for a low dBa, and the flexibility of a manual mode to allow for hands-on part finishing. To optimize efficiency, it also includes casters for easy installation, a smart electrical panel design, and pass-through door capability to help streamline your entire additive manufacturing operation.

Click to download the DECI Duo sell sheet.

NITOR

The patent-pending PostProcess NITOR automated surface finish system is exclusively engineered for additive manufactured parts. Designed to meet the specifications for your desired Roughness Average (Ra) to achieve various types of finishes, the NITOR is ideal for all 3D printed materials, including FDM, SLS, SLA, CLIP, PolyJet, Ultem and more. No other post-print solution integrates hardware, software, and chemistry into a complete system that removes the post-print bottleneck to enable increased time to market.

PostProcess is singularly dedicated to post-print technologies for the additive manufacturing market. The result is a forward-thinking design that increases the efficiency of your 3D printing operations. The NITOR’s large working envelope can be divided to run both abrasive and polish operations simultaneously. Additionally, PostProcess’ proprietary and eco-friendly media and detergents are formulated specifically for additive materials.

PostProcess’ AUTOMAT3D™ software, which controls their proprietary Agitation Algorithms, provides real-time decision making for your desired surface finish while preserving the fine-feature detail of unique geometries. Precisely controlling all variables, including heat, frequency, amplitude, and lubricity, PostProcess solution ensures less breakage. In addition, you have the capability to “set it and forget it” with recipe programming that no other system can offer.

Download the NITOR sell sheet